| Create a Windows 95 Dial-Up Networking Connection |
| | If you already have Internet software installed and your Network Control Panel is configured properly, you can just add a Dial-Up Networking connection to connect to us (you don't need to install our software). Simply follow these directions. Note: You must have Microsoft's Dial-Up Scripting tool unless you are running Windows 95 OEM-SR2. This utility can be found on your Windows 95 CD-ROM in the directory \ADMIN\APPTOOLS\DSCRIPT or you can download it by clicking here. You do not need to worry about following these directions if you have installed Accutek's software. |
| | A. | Add the Dial-Up Networking Connection |
| | | 1. | Double click on "My Computer" |
| | | 2. | Double click on "Dial-Up Networking" |
| | | 3. | Doulbe click on "Make New Connection" |
| | | 4. | For the name of the computer to dial, type in Accutek. |
| | | 5. | Select the modem you use from the list of modems and click on Next. |
| | | 6. | For the phone number, enter 775 as the area code and 828-0875 for the phone number (if you are not local to Reno, but you are local to Carson City, use 882-6671) and click on Next. |
| | | 7. | Click on Finish. |
| | B. | Download the Connection Script |
| | | 8. | Right click on this link and choose "Save Target As" (if you are using IE) or "Save Link As" (if you are using Netscape). |
| | | 9. | Save the file as "C:\Program Files\Accessories\Accutek.scp" on the computer that you are setting up the Dial-Up Networking connection on. |
| | C. | Set the Dial-Up Networking Connection Properties |
| | | 10. | Right click on the Accutek icon in the Dial-Up Networking folder and choose Properties from the pop-up list. |
| | | 11. | If you have a "Server Types" tab, go to section D. If you have a "Server Types" button, go to section E. |
| | D. | Set the Dial-Up Networking Connection Properties for OEMSR2 |
| | | 12. | Click on the "Server Types" tab. |
| | | 13. | Uncheck the "Log on to network", "NetBEUI", and "IPX/SPX Compatible" boxes. |
| | | 14. | Click on the "TCP/IP Settings" button. |
| | | 15. | Select "Specify Name Server Addresses" |
| | | 16. | For the Primary DNS, use 204.212.171.2. |
| | | 17. | For the Secondary DNS, use 204.212.171.1. |
| | | 18. | Click on OK. |
| | | 19. | Click on the Scripting tab. |
| | | 20. | Click on the Browse button. |
| | | 21. | Find the Accutek script file (Accutek.scp or just Accutek), select it, and hit OK. |
| | | 22. | Uncheck the box that says "Start terminal screen minimized" |
| | | 23. | Hit OK. You are now ready to connect to Accutek! |
| | E. | Set the Dial-Up Networking Connection Properties for non-OEMSR2 |
| | | 12. | Click on the "Server Types" button. |
| | | 13. | Uncheck the "Log on to network", "NetBEUI", and "IPX/SPX Compatible" boxes. |
| | | 14. | Click on the "TCP/IP Settings" button. |
| | | 15. | Select "Specify Name Server Addresses" |
| | | 16. | For the Primary DNS, use 204.212.171.2. |
| | | 17. | For the Secondary DNS, use 204.212.171.1. |
| | | 18. | Click on OK three times. |
| | | 19. | Click on Start..Settings..Control Panel. |
| | | 20. | Double click on Add/Remove Programs. |
| | | 21. | Click on the "Windows Setup" tab and click on the "Have Disk" button. |
| | | 22. | Insert your Windows 95 CD-ROM into your CD-ROM drive (if you don't have a Windows 95 CD-ROM, ignore this step) |
| | | 23. | Where it says "Copy manufacturer's files from," type in the directory where the Dial-Up Scripting Tool can be found (this is usually D:\ADMIN\APPTOOLS\DSCRIPT where D is the letter of your CD-ROM drive) and hit OK. |
| | | 24. | Put a check in the box that is next to "SLIP and Scripting for Dial-Up Networking" and hit Install. |
| | | 25. | After the files are done copying, hit OK to close Add/Remove Programs and then close the Control Panels. |
| | | 26. | Click on Start..Programs..Accessories..Dial-Up Scripting Tool. |
| | | 27. | Select Accutek on the left-hand side. |
| | | 28. | Click on the Browse button. |
| | | 29. | Find the Accutek script file (Accutek.scp or just Accutek), select it, and hit OK. |
| | | 30. | Uncheck the box that says "Start terminal screen minimized" |
| | | 31. | Hit Apply and then Close. You are now ready to connect to Accutek! |
